Air Dampers In Ducts

$15——150 USD

Spiral Pipe is available in 3-inch to 36-inch diameter in five foot lengths. It is considerably stronger than longitudinal pipe of the equivalent gauge. All 22 gauge Spiral Pipe measures 1/16″ less than the noted diameter on the inside (I.D.). Example 6″ diameter is 5-15/16″ I.D. A ventilation Spiral Duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh outside air and remove stale indoor air. Ventilation ductwork can be divided...

$29——290 USD

A Ventilation duct silencer is a component of ventilation system used to reduce noise transmitted inside ventilation ductwork. Duct silencers are also referred to as sound attenuators, sound traps or mufflers. 1,the use of raw materials are Stainless Steel Duct and galvanized steel; 2, strong noise reduction effect, reduce energy consumption, save operating costs, high strength, good sealing performance, beautiful appearance, simple installation, long service life; 3,Used for air supply,...

$6——43 USD

Pressed T-Pieces are made up of pressed collar saddle and main pipe. TP type is made up of two pressed parts. If gasket is not needed, please specify “X” after type, i.e. tx. Pressed T-Pieces are made up of collar saddle and main pipe. TVX type is tilted T-piece. If gasket is needed, please delete “X”after type, i.e. Tv. lf no special instruction, 0°is 45°，and other angles should be specified in advance. TVBX type is made up of TVX type and bend. Standaro d TVBX is without gasket, and if gasket...

$6——43 USD

The Four Way Pipe Fittings are convenient for the connection of Spiral Ducts in the ventilation system Stainless steel four is equal to the diameter and diameter, equal to the four end of the pipe are the same size; The main pipe size of the four reducer is the same, and the pipe size is smaller than that of the main pipe. Four Way Pipe Fittings is used for pipe branch of a pipe fitting. 1, simple installation, labor saving, time saving; 2, the use of raw materials are produced by the Stainless...

$6——15 USD

Main products are spiral air duct, air duct silencer, damper and other ventilation pipe fittings and accessories. Access Doors for Spiral Duct and Rectangular Duct. To suit low, medium and high velocity systems. Required by building regulations to allow easy access by technicians for cleaning of duct systems and maintenance of fire dampers and volume control dampes

$10——22 USD

【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use. 【Wide Application】 These back draft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications.【Material】The Back Draft Damper is made of stainless steel and the internal blade is made of galvanized...

$9——65 USD

Balancing dampers are simply manual dampers encased in a galvanized sheet metal sleeve. Each branch should have a balancing damper installed. That way, it's possible to regulate the airflow by adjusting the position of the damper. They should be located in areas that are easily accessible for adjustment. The ductwork regulates the flow of air and redirects it to specific places of a house. The same kind of company in the sale also Back Draft Damper Our Ventilation Duct Dampers are made from...

$29——290 USD

YRS type use glass wool as sound-proof material. A Ventilation duct silencer is a component of ventilation system used to reduce noise transmitted inside ventilation ductwork. Duct silencers are also referred to as sound attenuators, sound traps or mufflers. 1,the use of raw materials are Stainless Steel Duct and galvanized steel; 2, strong noise reduction effect, reduce energy consumption, save operating costs, high strength, good sealing performance, beautiful appearance, simple installation,...

$13——29 USD

Ducting Bends for ventilation are produced in diameters range 80 mm to 1600 mm of galvanized, aluminum and stainless steel sheet at 15, 30, 45, 60 and 90 degree angles. It is recommended to choose the version with EPDM seals to ensure achieving "D" class leakage (airtightness) according to EN 12237 (SITAC certificate). In both versions there are 4 types of ducting bends: BP (w/o seals) and BPL (with seals) pressed bends - in diameters range 80 to 250 mm. BS (w/o seals) and BSL (with seals)...

$15——150 USD

Spiral Duct and fittings along with Flexible Hoses Constitute complete piping system. Spiral duct is commonly used in dust collection as well as other applications such as industrial ventilation, spray booth stacking, welding booths, paper trim, pharmaceutical clean rooms, etc. It can be also distinguished according to the material from which it’s made, e.g. rigid spiral pipe is usually made of galvanized steel sheet; flexible ducts often made of aluminium, polyester foil, etc. By far the most...

$15——150 USD

Spiral duct and fittings along with flexible hoses Constitute complete piping system. Spiral duct is commonly used in dust collection as well as other applications such as industrial ventilation, spray booth stacking, welding booths, paper trim, pharmaceutical clean rooms, etc. It can be also distinguished according to the material from which it’s made, e.g. rigid spiral pipe is usually made of galvanized steel sheet; flexible ducts often made of aluminium, polyester foil, etc. By far the most...

$15——150 USD

Spiral Pipe is available in 3-inch to 36-inch diameter in five foot lengths. It is considerably stronger than longitudinal pipe of the equivalent gauge. All 22 gauge Spiral Pipe measures 1/16″ less than the noted diameter on the inside (I.D.). Example 6″ diameter is 5-15/16″ I.D. A ventilation spiral duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh outside air and remove stale indoor air. Ventilation ductwork can be divided...

$15——150 USD

It can be also distinguished according to the material from which it’s made, e.g. rigid spiral pipe is usually made of galvanized steel sheet; flexible ducts often made of aluminium, polyester foil, etc. By far the most popular ductwork types used for both residential and industrial ventilation systems are rigid spiral ducting and Rectangular Duct. 1, the use of raw materials are produced by the steel galvanized steel plate; 2, high strength, small resistance, good sealing performance,...

$15——150 USD

Spiral pipes and fittings along with our flexible hoses will complete your piping system. Spiral pipe is commonly used in dust collection as well as other applications such as industrial ventilation, spray booth stacking, welding booths, paper trim, pharmaceutical clean rooms, etc. A ventilation spiral duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh outside air and remove stale indoor air. Ventilation ductwork can be...

$15——150 USD

We manufacture spiral duct in 18, 20, 22, & 24 gauge galvanized metal. Stronger than other pipe – Our Spiral pipe is up to 20% stronger than smooth pipe systems of the same gauge, due to the added spiral reinforcement. No painting required on our spiral pipe, will last years outdoors. A ventilation spiral duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh outside air and remove stale indoor air. Ventilation ductwork can...

$15——150 USD

It can be also distinguished according to the material from which it’s made, e.g. rigid spiral pipe is usually made of galvanized steel sheet; flexible ducts often made of aluminium, polyester foil, etc. By far the most popular ductwork types used for both residential and industrial ventilation systems are rigid spiral ducting and rectangular ducting. A ventilation spiral duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh...

$15——150 USD

A ventilation spiral duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh outside air and remove stale indoor air. Ventilation ductwork can be divided according to its shape, namely, circular, rectangular and oval (a compromise between rectangular and round ventilation ducts). Spiral pipes and fittings along with Rectangular Ducts Series will complete your piping system. Spiral pipe is commonly used in dust collection as well...

$15——150 USD

A ventilation spiral duct is the basic element of the ventilation system. Ventilation ducts are passages used to transport air – supply fresh outside air and remove stale indoor air. Ventilation ductwork can be divided according to its shape, namely, circular, rectangular and oval (a compromise between rectangular and round ventilation ducts). Spiral ducts and fittings along with Rectangular Ducts Series will complete your piping system. Spiral pipe is commonly used in dust collection as well...

$6——43 USD

T-pieces are made up of collar saddle and main pipe. TVX type is tilted T-piece. If gasket is needed, please delete “X”after type, i.e. Tv. lf no special instruction, 0°is 45°，and other angles should be specified in advance. Pressed T-Pieces are made up of pressed collar saddle and main pipe. TP type is made up of two pressed parts. If gasket is not needed, please specify “X” after type, i.e. tx. After the pieces are cut, we brake and bend to form the duct fittings and custom sections. TVBX...

$6——43 USD

Pressed T-Pieces are made up of pressed collar saddle and main pipe. TP type is made up of two pressed parts. If gasket is not needed, please specify “X” after type, i.e. tx. After the pieces are cut, we brake and bend to form the duct fittings and custom sections. TVBX type is made up of TVX type and bend. Standaro d TVBX is without gasket, and if gasket is needed, please delete “X” after type, i.e. TVB. Pressed T-Pieces Ducting Part A tee-shaped connecting segment for your ventilation...